Is it possible to resize an engagement ring

To make a ring smaller, the jeweler heats up and cuts off a small piece of the band and then solders the two ends back together to form a perfect circle. Afterward, they clean and polish it. You may opt to keep the excess metal, called a "cutout," in case the ring needs to be sized up at a later time. It's much easier to size a ring smaller than it is to size it larger. To be resized, your ring must be made of metal such as silver, gold or platinum.

Jewelers cannot resize rings made of wood, quartz or other non-metal material. There must also be enough space around the ring for it to be made larger or smaller. Rings that have a simpler design are the easiest to resize, although it's usually possible to do so with rings that have a channel setting or one with many gemstones. For those types of rings, it may be necessary to add, remove or rearrange the setting to resize it properly. Options for rings that can't be resized include wearing a smaller ring next to it to help it stay in place or having the ring remade in the correct size.

You can also invest in an inexpensive ring overlay which is a removable plastic adjuster that can fit over any ring shank to make it fit without cutting it. Since ring resizing is such a delicate process, it's imperative that you find an expert jeweler.

When done by a knowledgeable and skilled jeweler, you shouldn't even be able to tell that the ring was resized — except for platinum which inevitably shows a fine line at the soldering joint. Expert jewelers are skilled in working with delicate gemstones and settings and will ensure that your ring is correctly resized and that all of the details, such as engravings and prongs, are restored correctly.

There is no exact price list when estimating how much it will cost to have your ring resized. It's always a good idea to visit with a reputable jeweler who can inspect the ring and give you a cost estimate based upon the desired results. Keep in mind that the final cost may vary slightly from the estimate if the amount of work or material for resizing the ring changes during the process. The cost depends on several different factors including the amount of work and time involved and the materials needed.

These include:. Certain precious metals are more expensive than others and will directly affect the price you pay for resizing. From least expensive to most expensive they include:. It typically costs less to have a ring sized smaller than larger, as there are no additional materials needed. The thickness of the ring also can make it more expensive, with thicker rings requiring more materials than thinner ones.

Rings with flat bottoms, called euro-shanks, typically cost more to resize due to the corners requiring more metal. Usually, the more gemstones a ring has, the more potential for them having to be moved or adjusted during the resizing process.

Gemstones that lie along the area of the new curvature sometimes have to be removed and reset to accommodate the new shape or due to temperature sensitivity. This usually results in a higher resizing cost.

Although it can be expensive to resize your ring, consider that the cost to resize a ring is always a lot less than the cost of replacing it should it fall off and get lost or have to be cut off your finger.

Even if you have your rings insured, as is always recommended, the sentimental value can never be replaced. It typically takes about one to two weeks to have a ring resized. Rings with very intricate details or settings usually take longer, as more time is required to work with them.

Reputable jewelers will usually give you a timeframe of several days to several weeks, depending on the jeweler's current workload. Always take the time to find a trustworthy jeweler with whom you feel comfortable leaving your ring. Look for a jeweler that has met the strict standards of the American Gem Society , as only five percent of jewelers meet this standard. See all luxury watches. Luxury Watches: The Old Classics. Jewellery Trends. See all jewellery trends. Timeline of Diamond Cutting.

Subscribe Keep up to date with the latest jewellery trends, insights and inspiration from Q Report. See all engagement rings. Perth's Top Ten Proposal Locations. Yellow gold or white gold? Pear-shaped or oval? Wedding band or no? Protecting Your Engagement Ring in Summer.

See all diamonds. Are Diamonds a Good Investment? Diamond Certificates Explained. Retail vs Resale: The Value of a Diamond. See all general. Journey of a Diamond: Mines to Markets. Should I Use a Proposal Planner? Helpful Resources. See all Resources. All Articles. Share this article. How to Resize an Engagement Ring. Q Report Team August 04, min read. Should I resize my ring if it fits well but slips from side to side? How much smaller or larger can jewellers make my ring?

How do jewellers reduce the size of an engagement ring? Can every ring be resized? How long does it take to resize a ring? How much does engagement ring resizing cost? Where should I go for engagement ring resizing? Featured Resource. The Complete Guide to Jewellery Insurance. Jewellery Insurance Instant Quote. Jewellery insurance made easy Get an instant quote now. Related Articles. Jewellery Insurance General.

I have a 14MM wide artcarved ring that is 14K Yellow gold with diamonds aligning each outer side almost looks like 3 bands but the diamonds run along the top to mid finger on both sides of the ring. Do you believe it is possible? It should be possible to downsize the ring. Because of an enlarged knuckle I need to have my wedding ring cut off. Can it be repaired to wear on another finger?

Much of this is dependent on how the ring was sawn off and the original design of the setting. I recently was given a ring from a friend but it is a few sizes too big. The shank is very plain and meets a sort of swirling design in the front followed by an opal in the center of it.

How much would it cost to resize? And could they given the metal? The ring is a 9, and needs to be resized down to a 6. I can link a photo if need be. Bring it to your local jeweler and ask for a quote. Sterling silver is definitely resizable but details like jewelry design may impact the final outcome.

Morning, My friend and I would both like to have our engagement rings resized. Can the ring be enlarged while we watch? Depending on ring design and equipment on hand, it may not be possible to get the ring resizing done the same day you bring it in. I have resized a platinium ring, once size up. The initial weight was 5. Is it normal? I thought that increasing the size would involve either to stretch same weight or to add more metal after cutting the ring.

Ask the jeweler what was done during the upsizing of the ring that caused the reduction in weight of the ring. Thank you for your answer. It is difficult to add back the platinum because the whole shape would be different.

It would make sense depending on the design of your ring. About a year ago, I had my wedding ring classic with 5 diamonds across set in platinum on a gold band resized up about a size. There was no discussion of the method of resizing, they just measured me for my proper new size. I had not been able to wear the ring for some years. I have never ever seen a ring so thin at the back the palm side. However, I assumed that they must know what they were doing as they are so reputable and was delighted to get my ring back and wear it finally, so I did not complain.

Here I am a year later and the ring started getting rougher and rougher at the bottom middle, finally upon inspection I saw it was starting to break and now it has actually broken completely at the thinnest part at the back or bottom middle palm side.

I am really disappointed. When I brought my ring to be sized up, I just assumed they would cut and add gold for it to fit me. I never thought they would just stretch it out to the point of being thin enough to break. This is a reputable local jeweler, although I have been reading complaints online lately.

I called and let them know my problem and the owner himself called me back and was a bit annoyed, asking me why I did not complain at the time I picked it up. I told him I was not a complainer but had been shocked at the thinness of the ring, but assumed they had done a good job because of their reputation — afterall, I know little to nothing about resizing rings except what I just read here — they are the experts I trusted.

I also was happy just to get my ring back wearable. He insists on a personal meeting with me, so I hope to resolve it. I am just sad and disappointed. Carrie, these things do happen from time to time as consumers may not fully understand what happens to a ring during resizing. Look on the bright side; the jeweler wants to talk and I think they are trying to make things right.

So, go to the meeting with an open mind and I think things will work out eventually. I purchased a ring made to order. When we asked for the ring to be remade we were advised they would resize it and have it back in a week — Ignoring our request to have it remade correctly.

The ring has diamonds half way around each side with a setting on top. It has been 6 months, the band has stretched a considerable amount and a diamond fell out of the band. When i took it back to the shop they sent it off to the jeweler who completes the work.

Band is 18 carat white gold with round brilliant diamonds on the band. I am so disappointed they would not remake the ring in the first place and now fear this can happen again. Getting a refund outright from the start if you suspected workmanship issues should have been the right thing.

Diamonds can fall out of their bands for all types of reasons and resizing could be one of them. I was told at the local jewelry shop that platinum is hard to resize compare to white gold…pls help- thank you in advance :. My advice is to plan ahead and buy exactly what you want in the long term.

Upgrading from one material to another material is really unnecessary it it complicates things. Your jeweler is feeding you bullshit. Platinum is not hard to resize. Aside from preventing allergic reactions and a denser weight, there are practically no other benefits of paying for a platinum wedding ring. It has a 1.

One of the diamonds had fallen out and some of the others were loose. Now the jeweler wants us to pay to have it resized. We said we would wait a few days to see if it was simply a swollen finger. Should we be suspicious? Would a jeweler use 14kt white gold from a ring for resetting diamonds…. Theoretically speaking, repairing a fallen out diamond should have zero effect on sizing as they are completely separate issues.

Examine the setting at the repair area to see if you can see anything out of the norm. Hi Paul, I recently bought an engagement ring for my girlfriend. I could not get her ring size after trying various tricks here and there without giving it away. I ended up guessing a size 6 but suspect it might be a tad too big. Question: Would resizing down to a I know it may vary, but in your opinion is going from a 6 to 5. For some pave settings, resizing may pose some issue.

If you are still in your refund period, get a complete refund and buy a new ring with the same design in the correct size. After a jeweler measured my finger, we agreed that 3.

When the ring arrived, it was a little over 3. The jeweler thought that the ring sat well on my finger even though I thought it was tight. The 3. I am taking the opportunity to try this new size. My ring sits tight on my finger. It does not rotate on its own but I can rotate it with my other hand when I try to remove it. I feel that it is tight but doable. I would like to get it resized but I am worried that they may not get the right size again. May be this time it will come back to loose.

I am also worried about the integrity of the ring. I am planning to take my ring to another jeweler and get their professional opinion but I would also like to hear what you have to say. It sounds like the size of 3. Is this your first time wearing a ring? If it is, it may take some getting use to.

I had a pure silver ring, hand crafted by an artist, resized in a local jewler. The ring came back definitely lighter than it was. Did they steal my silver? Is that a thing? It was resized twice. Once for an increase of 0.

Each time it was lighter and lighter. Now it weights just like a cheap titanium china skull ring. The best thing to do is to ask what happened during the resizing the ring. If they had to touch up or rebuff the ring to restore its luster, the repolishing process actually removes material from the ring. And just to be clear, silver is not expensive. No jeweler in the right mind would want to steal a small amount of silver and jeopardize their reputation in doing so. Found this page by googling.

I just recently found my class ring and I believe previously I may have taken it to be sized up a tiny bit, but nothing dramatic.

Are class rings able to be sized down as well? Depending on the material it was made with and the design, resizing may be a breeze or result in complications. Your best bet is to bring it to a jeweler and get them to assess it. Hi Paul! I am starting to get the feeling that the ring size I went with may be slightly smaller than her finger size.

The center stone is far from cheap and scared that I may fall victim of a stone swap with a lower grade. Would you recommend asking for the stone to be taken out before hand or can they resize in front of me? Depending on the ring design and the manpower they have at the jeweler, it may or may not be possible to get the resizing performed in front of you.